油墨用消光粉S60彈性體塑膠體皮革用白炭黑





油墨用消光粉S60彈性體塑膠體皮革用白炭黑
油墨用消光粉S-60
Ink coating S-60
此系列產品消光度高、透明度高、易分散、孔隙率大等優點。適用于絲網印刷油墨、紙
張印刷油墨、膠印印刷油墨、塑料印刷油墨的產品上。
一、
消光率高-----各種大小型號的顆粒剛好滿足涂料配方要求,消光率越高,顆粒
分布狹窄且對稱消光率高。
二、透明度好-----消光粉經過科學的排列,折光指數與成膜樹脂的折光指數相近,避
免了消光透明漆可能發生的白霧狀。
三、易分散-----粒徑分布的控制使之很容易分散于涂料之中,對于標準的溶解機。
以1200r/mm(槳葉速度為5-6m/s)攪拌葉輪分散10-15分鐘,就可得到充分的分散,注
意溫度控制在50℃以下。
四、漆膜無影響-----消光粉的純度、粒徑的完整性、耐研磨的特性及合理選擇匹配
的型號,不僅對漆膜重涂附著力無影響、耐磨損,而且涂膜平滑、手感好、光澤一致性好。
This serious of products has the advantages of high extinction, high transpar-
ency,easy dispersion, high porosity, ect··Applicable to screen printing ink,paper
printing ink,offset printing ink,printing ink,plastic printing ink.
One, high rate of extinction -----Various sizes of particles just meet the
requirements of the paint recipe, extinction rate is higher, the particle size distribu-
tion and narrow symmetrical extinction rate is high.
Second,good transparency-----Extinction powder through the arrangement
of science, the refractive index of refraction index and film-forming resin, to avoid
the possible extinction transparent paint white mist.
Three, easy to disperse ----- Control of the particle size distribution makes it
easy to disperse in the paint, for the standard solution, as the speed of 1200r/mm
(blade speed of 5-6m/s) mixing impeller dispersed 10-15 minutes, it can be fully
dispersed, attention that temperature should be controlled below 50℃.
Four,no effect for film ----- The purity of extinction powder, the integrity of the
particle size, the special characteristics of abrasion resistance and reasonable
choice of the grinding characteristics matching models, not only have no effect on
the film recoat adhesion, but also it will be good for abrasion resistance and coating
smooth, the hand feeling will be much better, gloss consistent will be better too.